Monoblock Z "Platinum Edition"
Monoblock Z "Platinum Edition" – the new hi-tech forged wheels from BRABUS. The type designation "Z" stands for an innovative ten-spoke styling. The wheels are manufactured using a hi-tech forging process and combine maximum strength with minimum weight.
Like all BRABUS wheels, manufactured with outstanding precision in the highest quality (OEM standard), fitted with BRABUS signet and milled "Geschmiedet" ("Forged") seal.
BRABUS alloy wheels are ready for use with the original Mercedes-Benz tire-pressure monitoring systems (TPMS). Vehicles with active TPMS system require the appropriate tire sensors.
Tire Sizes Monoblock Z 21":
9.0J x 21H2, tire size 265/35 R 21 (FA) - Also for vehicles with optional ceramic brake system (SA code B07)
10.5J x 21H2, tire size 305/30 R 21 (RA) - Also for vehicles with optional ceramic brake system (SA code B07)
9.0J x 21H2, tire size 275/35 R 21 (FA) - Not for vehicles with optional ceramic brake system (SA code B07)
10.5J x 21H2, tire size 315/30 R 21 (RA) - Not for vehicles with optional ceramic brake system (SA code B07)
Tire Sizes Monoblock Z 21" (Front axle) & Monoblock Z 22" (Rear axle):
10.5J x 21 H2, tire size 275/35 R 21 (FA) - Also for vehicles with optional ceramic brake system (SA code B07)
12.0J x 22 H2, tire size 335/25 R 22 (RA) - Also for vehicles with optional ceramic brake system (SA code B07)
Tire Sizes Monoblock Z 22":
9.0J x 22 H2, tire size 265/30 R 22 (FA)
10.5J x 22 H2, tire size 305/25 R 22 (RA)
Please note: The purchase and installation of these wheels may require checking for sufficient clearance of the complete tire/wheel combination under all load and operating conditions. The technical work required is subject to an extra charge.
Assembly / painting option preselected
Please note: Due to the items already selected in your shopping cart, the delivery option is preselected and cannot be changed.
Inquiry Article
This item requires a lot of consultation because there are customisation options, vehicle-specific differences or additional dependencies. It is therefore added to the shopping basket as an "inquiry item" and a BRABUS consultant will then contact you for all further details.
Tyres according to expert opinion & professional fitting
Please note: The installation must be carried out by a suitable specialist company. The regulations stipulated in the TÜV certificate with regard to tyre dimensions, clearance, etc. must be observed. You will receive the TÜV certificate together with your invoice by e-mail.
Item only available on request
After in-house checking, it is only possible to add this item to the shopping basket as an "enquiry item". A BRABUS customer advisor will then contact you for all further details.
BRABUS Tuning Warranty
Please note the Provisions of the BRABUS Tuning Warranty